ForgeApply
Try it free

ForgeApply · Job listing

Station Servicer C - Station Servicer

Aep

Columbus, OH, USonsite

See all 148 open roles at Aep

Tailor your resume for this Aep job in about a minute.

ForgeApply tailors your resume and cover letter to this exact posting, then hands you a ready-to-submit application for Aep's site. Free trial, no card required.

About this role

Job Posting End Date 08-25-2026 Please note the job posting will close on the day before the posting end date

Job Summary

Participate in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Work with existing Station Servicer in assigned area to inspect and maintain assigned station facilities with expectation to progress to Station Servicer in the assigned area. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. Job Description

Station Servicer C - Station Servicer:

What You'll Do: • Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification.

• Select proper prints and/or drawings for various work and have a basic understanding of each.

• Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work.

• Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters.

• Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures.

• Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each.

• Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start- run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions.

• Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems.

• Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc.

• Become familiar with Company DC Supply Procedures to ensure NERC Compliance and proper equipment operation. Assist area personnel on DC Supply Installations and repair work while ensuring proper documentation.

• Become familiar with Company Station Communication System Procedures to ensure NERC Compliance and proper equipment operation. Assist area personnel while performing inspections on such equipment. Station Communication equipment consists of radios, carrier current, telemetering, pilot wire and control equipment, and other required communication systems identified by NERC.

• Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed.

• Gain knowledge and proficiency in steel and aerial lift rescue.

• Maintain records and prepare and submit reports as required.

• Attend and participate in training and assist in the training of other employees as assigned.

• Use and operate various company vehicles, specialized equipment, hand and power tools.

• Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipment

• Use hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment.

• Knowledge and use of various knots used in station work.

• Perform similar or less skilled work as assigned

• Assist employees of equal or higher classification; direct the work of employees assigned to assist.

• Become familiar with the Company's safety rules and practices

What We're Looking For:

Station Servicer C:

Education requirements are listed below: • Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.

• Equivalent education and experience is limited to military training and work experience of technical/technician nature(such as aviation and nuclear instrumentation technician); or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.

Work Experience requirement listed below: • No previous work experience required.

Required License(s)/Certification(s) are listed below: • Must possess and maintain a valid commercial driver license.

• Must meet all vehicle operation requirements as designated by federal and/or state law.

Other Requirements: • Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents.

• Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression or vacate the current classification.

• Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Serv

Salary insight

This posting doesn't disclose pay. Across 180 Columbus jobs with disclosed salaries on ForgeApply, the median is $125k.

Based on live postings with disclosed pay on ForgeApply; refreshed daily. Not an estimate of this employer's offer.

Tailor your resume for this Aep role before you apply.

Tailor my resume for this job

Similar jobs

Free ATS checker · No Salary on the Job Posting? How to Find the Number Before You Interview