Principal Electrical Engineer (Design Lead)

About this role

WHAT YOU’LL DO

1. Act as the in-house electrical lead for Midjourney Medical: own the electrical architecture of the scanner and the technical direction for all board-level design.

2. Own complex board design end-to-end: architecture, schematic capture, layout (high-speed digital, analog/mixed-signal, power), DFM/DFT, fabrication and assembly vendor management, bring-up, and revision control.

3. Write firmware for embedded targets (MCU/SoC): drivers, real-time control loops, safety-relevant logic, bootloaders, and field update paths.

4. Audit and update HDL (FPGA) code for high-throughput data acquisition, timing/synchronization, triggering, and pre-processing of ultrasound and sensor data streams.

5. Define electrical interfaces and data contracts with software, recon/ML and mechanical teams: timing budgets, clocking/sync, signal integrity, connectors/harnessing, and failure modes.

6. Establish electrical engineering rigor: design reviews, schematic/layout review checklists, bring-up procedures, test fixtures, and documentation suitable for a regulated medical device program (DHF, traceability, change control).

7. Mentor and grow the electrical function; select and manage external design partners where leverage is high.

WHAT WE’RE LOOKING FOR

- Deep experience designing complex boards from blank page to stable revision, including high-speed digital and analog/mixed-signal domains.

- Strong schematic and layout skills (Altium/KiCad or equivalent) with real signal integrity, power integrity, grounding, and EMI/EMC instincts.

- Solid embedded firmware background in C/C++ (and Python for tooling): peripherals, DMA, interrupts, real-time constraints, and debugging on hardware.

- Practical HDL experience (VHDL/Verilog/SystemVerilog) for data acquisition, timing, and streaming interfaces.

- Track record of owning bring-up and debug on real hardware: scopes, logic analyzers, and disciplined root-cause analysis.

- Technical leadership: clear trade-offs, strong written documentation, and the ability to set the electrical bar for a lean, fast-moving team.

USEFUL EXPERIENCE

- Ultrasound, imaging, instrumentation, or other high-channel-count data acquisition systems (ADC/AFE front ends, transducer interfacing, pulser/receiver design, low-noise analog).

- FPGA-to-host high-bandwidth data paths (10/25/100G Ethernet, serial transceivers) and deterministic multi-board synchronization.

- Power electronics and power distribution for complex electromechanical systems: rail architecture, sequencing, isolation, and thermal considerations.

- Safety-critical or medical device electronics: interlocks, isolation and leakage requirements, IEC 60601-adjacent design practice, and design controls.

- Manufacturing and serviceability thinking: DFM/DFT, ICT/functional test fixtures, calibration flows, yield and field-failure analysis.

- Building an electrical function from scratch: tooling, libraries, part standardization, ECO process, and vendor ecosystem.

- Familiarity with high-performance computing systems.

Similar jobs

• Principal Electrical Engineer — Leolabsinc · Denver, CO
• Principal Electrical Engineer — K2spacecorporation · Los Angeles, CA
• Principal Electrical Engineer — Graphcore · Austin, Texas, United States
• Principal Electrical Engineer — Red6 · Denver
• Principal Electrical Engineer — Mach · Huntington Beach, CA
• Principal Electrical Engineer — Helion · Everett, WA
• Principal Electrical Engineer — Rocketlab · Tucson, AZ
• Principal Electrical Engineer — Crusoe · Arvada, CO - US