ForgeApply · Job listing
968 - Data Center Technician L2
Data centers
Tailor your resume to this posting in about a minute.
ForgeApply tailors your resume and cover letter to this exact posting, then hands you a ready-to-submit application for Data centers's site. Free trial, no card required.
About this role
Make an impact at NTT Global Data Centers Join NTT Global Data Centers and be part of a team that drives innovation and sustainability in the digital world. With over 150 data centers across more than 20 countries globally, we offer unparalleled opportunities to work on cutting-edge technology and transformative projects. Experience a collaborative, innovative, and inclusive workplace where your ideas are valued, and your growth is supported.
Your role at a glance The Data Center Technician provides a working level of data center knowledge and is responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, and fire life safety systems.
The Data Center Technician maintains and follows the processes that maximize customer uptime in the most cost-effective way. Ensures that data center problems are identified and repaired quickly, that contractors deliver quality services, and that internal customer demands are met. What we are looking for ESSENTIAL DUTIES & RESPONSIBILITIES
• Develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Systems of responsibility include:
• Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. • Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. • Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices.
• Tests performance of electromechanical assemblies and electronic voltmeters. • Reads blueprints, schematics, diagrams, or technical order to determine methods and sequences of processes. • Inspects parts for surface defects. • Installs electrical or electronic parts and hardware in housings or assemblies, using hand tools. • Aligns, fits or assembles component parts, using hand or power tools. • Operates, monitors, maintains, and responds to abnormal conditions in facilities systems. Areas include: Mechanical, Electrical, Fire Life Safety, and Building Monitoring and Control • Analyzes systems to ensure best practices for both internal and external customers • Provides feedback to DCO Engineering on the effectiveness of existing standards and processes • Works with contractors and consultants to review quality assurance for all system expansions, corrections, and upgrades • Works with the CF Ops Lead Technician to track and complete an aggressive preventive and predictive maintenance program • Ensures data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies and improving overall efficiency, and cost reduction. • Manages systems to avoid unplanned customer-impacting events • Works with CF Ops Lead Technician to determine maintenance requirements for mechanical, electrical, and fire life safety systems. • Performs other duties as assigned • Regular, predictable attendance is essential to satisfactory performance.
KNOWLEDGE, SKILLS & ABILITIES
• Possess an understanding of the mechanical, electrical, and fire life safety systems used in a data center environment including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler Systems
• Knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety • Current knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations) • Familiarity with data trending / tracking and analysis and the ability to utilize a PC based integrated critical monitoring systems • Ability to process Hands and Eye requests as required i.e., Tape Rotation, Rack and Stack of equipment, inventory hardware, power cycle devices, patch cable install/removal • Demonstrated hands-on experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: • Chilled Water Systems • Large Centrifugal Chillers • Cooling Towers • Heat Exchangers • Water Treatment Systems • VFD’s and Pumps • HVAC equipment • CRAC/CRAH’s • Humidification Systems • Water heaters • Water/Air filters • BMS and PLC Controls • Emergency Standby Diesel Generator Systems • Fuel/Oil systems, • 480/277 and 208/120 electrical generation and distribution • Static UPS Systems • Double Interlock Pre-Action Systems
• Excellent communication skills, both written and oral • Proficient with MS Office Suite (Word, Excel, PowerPoint, Project) • Ability to communicate effectively with customers and internal staff and effectively work in team environment • Ability to coordinate, supervise, and communicate with contractors who perform maintenance or upgrade work on these systems. • Ability to learn quickly and address issues as they arise during normal working hours or after hours. • Ability to operate in and promote a rigorous process-driven team environment • Ability to logically analyze and solve problems • Ability to effectively multi-task multiple projects
• Ability to operate Hand and Machine Tools (hammer, drill, saw, etc.) • Ability to operate electrical tools such as a multi-meter or infrared camera • Ability to operate a forklift • Must be comfortable working in a high stress, fast paced environment with shifting priorities. • Must be able to work on a shift which may require nights, holidays, and some weekends. • Possess critical thinking and complex problem solving skills
L1 EDUCATION & EXPERIENCE • High School Diploma required. • Associate’s Degree or equivalent education and/or work experience and a minimum of 2 years in a mechanical/electrical position within critical
Salary insight
This posting doesn't disclose pay. Across 44 Sacramento jobs with disclosed salaries on ForgeApply, the median is $100k.
See full Technician salary data for Sacramento →
Based on live postings with disclosed pay on ForgeApply; refreshed daily. Not an estimate of this employer's offer.
Ready to apply to Data centers?
Tailor my resume for this roleSimilar jobs
- 1143 - Data Center Technician L1 — Data centers · Chicago, Illinois
- Data Center Technician L1 — Data centers · Chicago, Illinois
- Data Center Technician — Lightningai · Puyallup, Washington, United States
- Data Center Technician — Nebius · Minnesota, United States
- Data Center Technician — Lightningai · Allen, Texas, United States
- Data Center Technician — Lightningai · Lisle, Illinois, United States
- Desktop Support Technician – L2 — Neweratech · San Jose, CA
- Data Center Technician — Nebius · New Jersey, United States
More like this: Technician & Field Service Jobs · Technician & Field Service Jobs in Sacramento · More jobs at Data centers · Browse all jobs